Railcore II 300ZL Project R3D 3D Printer Kit Review

Here is my review of the Railcore II 300ZL 3d printer from Project R3D. This is the first production kit, assembled by my friend Robert, and put through some prints by myself.

#railcore #projectr3d #3dprinterreview

Get your own Railcore II 300ZL kit here:
https://www.projectr3d.com/products/

Open Source Docs and BOM:
https://railcore.org/doku.php?id=:en:start

CLICK THESE LINKS

Magigoo: http://thought3d.com
Stronghero3D: http://3d.pn/stronghero3d

Matterhackers BUILD series filaments (aff) : http://3d.pn/mhbuild
Matterhackers 3D Printers (aff) : http://3d.pn/mhprinters

Proto Pasta (aff): http://3d.pn/protopasta

Prusa (aff): http://3d.pn/prusa

Puget Systems: http://3d.pn/pugetsystems

Channel Merch Shop : http://3d.pn/shop
3D Printing Nerd Shirts : http://3d.pn/shirt

You can buy me a coffee
https://www.buymeacoffee.com/3dprintingnerd
https://www.ko-fi.com/joeltelling

You can support what we do via Patreon
http://3d.pn/patreon

You can show support while shopping at these retailers

Amazon (US link) : http://3d.pn/amazon
Amazon (Canada link) : http://3d.pn/amazonca
Amazon (UK link) : http://3d.pn/amazonuk

——————————–
Find Me Socially!
——————————–
Twitch : http://twitch.tv/joeltelling
Twitter : http://twitter.com/joeltelling
Facebook : http://facebook.com/3dprintingnerd
Instagram : http://instagram.com/joeltelling

——————————–
Want to send me something?
——————————–
attn: 3D Printing Nerd
509 NE 165th st
Shoreline, WA 98155
USA

Music provided by https://futurevega.sourceaudio.com
Royalty Free Music by http://www.audiomicro.com/royalty-free-music

Comments

mnrobards says:

I was would have liked to see it running and doing an actual print.

getOrvillized says:

looks like you could bake cookies in it too! 😀

Practical Printing says:

I think the only weakness on this machine is the IR probe. I’d NEVER had success getting one of the differential IR probes to perform consistently in my environment on any of the machines I’ve tested with one.

Empiricus Dremomys says:

Spot on review, congrats. I have build a custom version as I wanted to integrate a Titan Aero and extended the height by 5cm. projectr3d.com even did some custom sides for me. Otherwise I followed the BOM list. It prints absolutely fantastic and ridiculously fast. Build is easy with the excellent guide. It is just a lot of screws…. Tony’s Simplify3D configuration worked great immediately, so it didn’t have a single failed print yet. Lubrication is super important to avoid Z banding. IR probe works with PEI but you have to run the leveling 3 times. Using it for a week without major issues. Looking at the probe grid however you see that dirt bubbles etc will interfere easily with the probe( all within 0.15mm). I now use an NPN Omron proximity probe much better compared to the IR probe for the PEI bed.
thing:3206498
thing:3285797
thing:3290533
thing:3313942

Alex K. says:

Joel – is the video of Robert building it posted anywhere?

elfpimp1 says:

Odd, I got a second notification for this vid. One right after watching it. And for some reason the thumbs up I gave it is not there. I had to re thumb it..

Sam Schmidt says:

Printing Nylon with a steel nozzle ( and esp. at high speed) will require much higher temps than usual.

Duo says:

Robert did a great job on his super-long build stream! It was fun to watch. The Etch-a-sketch gantry system isn’t CoreXY though, it’s a standard crossed XY gantry like an Ultimaker printer.

Carlos Jose Jimenez Bermudez says:

This is the reason why I refuse to buy a CR-10. I still need the money to buy this though.

Bajicoy says:

Great video! And quick thing about bed leveling probes, the bl touch as tested by thomas sandlander is by far one of the most inaccurate probes on the market

kazuya 6960 says:

I really like your videos but you cant compare ender 3 wirh this one lol. The kits is 10× the price of the ender 3…

dd d says:

where can I watch that full assembly video?

WillieRants says:

Great review, the kit looks amazing in so many ways. I think your points good and bad are spot on. I don’t think this kit is for me until it matures and has stronger support. I’m not into the “tinker” category. I just want to design and print things, but I do desire the layer detail. I’d be totally all in for a resin printer if it weren’t for the whole, toxic, smelly, messy bit. So this printer is really exciting from that perspective and I’ll be keeping an eye on it. But I think this printer represents a step in the right direction to bring us greater detail and accuracy at ever faster speeds.

dvanw6 says:

Damnit they dont ship to Australia. I want to get a good printer for manufacturing and printing fast, and this seems like it would work great!

B1ockboy 11 says:

Nice beard

ade rl says:

I have made a hypercube and can print a twisted case at 140mmps haven’t tried higher but it was fine :-)

GearsW says:

For the jam it might be that the e3d spacer is still in the bowden coupler this should be removed or else the bowden shifts

Niels says:

That Benchy printed at 75mm/s blew my mind. I really need to build this printer. I hoped you put this printer on your table and you did. Thanks Joel!

gyoussef says:

Hi Joel I have 4 printers a MK3 that I didn’t build, two wanhao duplicators i3, v2.1 and a plus and a geeetech Prusa i3 pro b that I did build. Would you recommend this printer for me or do you think it would be to advanced for me? Keeping in mind I don’t really know anything about electronics and coding.

TheMidnightSmith says:

Either you or Sean +1 for Rick and Morty true level. I was laughing for a solid 3 min! Now I have to decide between this and a resin printer in February lol. I tried finding info on this tool changer, but as far as I can see it allows swapping of heads?

GearsW says:

3d printing nerd you should test a precision piezo it’s a great probe!

Nerys says:

god I want one of these soooooo badly. I saw some of the 0.02mm (not a typo you read that right) layer height prints this machine can achieve and they are truly awe inspiring !!

I can print benchy’s like that all day long with my ender 2 army. …… at 20mm/s max speed !!! this thing does it equal or BETTER at 75mm/s

staggering. GOD I want one of these things so bad. who do I have to eat to get one………

as for bed leveling. I question if (within a reasonable price point) if its even possible to achieve the needed resolution with a mechanical bed detection solution.

meaning I don’t think a mech switch solution can level with enough precision to achieve the better than 0.02 resolution you NEED to get a 0.02 layer height.

Pixelated Thomas says:

Woah that’s expensive. At least to me. I’ll stick with my previously broken cr10. But I think it’s super cool though!

troy1572 says:

Joel i’m just gonna guess that you were printing most of those models (if not all) at rather high speeds, but i don’t think you factored in the most probable cause of the stringiness.
When printing at higher speeds you’ll have to set your hotend to a higher temperature (by about 5 to 10 degrees) because the filament is rushing through the nozzle and doesn’t have as much time to heat up.

I’m not sure if you’ll read this by the time you return the Railcore but I’d really love to see if your results change with a higher hotend temperature :)

Also, how is this printer capable of printing so fast with absolutely no ghosting?!?!

Vincent Groenewold says:

Pfff, this is my next printer for sure. Sorry Prusa. :)

Mhadra says:

At this point, I’d just like a printer that I can update the firmware on easily. Been trying to update my CR-10 firmware for months, but the Arduino returns errors that, so far, more practiced hands than mine have not had an answer to.

Think A Little says:

Watch out Josef Prusa. lol

MooSaysDaCow says:

What’s the difference between the R3D Railcore II and their D1700 printer?

Stuff With Kirby says:

For nylon I have found a temperature change of a few degrees hotter can make a major difference. Also no fan. On my lulzbot mini the nylon was breaking apart easily at 235, but once i bumped it up 15 degrees it was perfect.

Dan Keller says:

Regarding the cooling – given the Duet and such, I would assume you could push this thing well above 75mm/s. I wonder if you could push this thing above 100mm/s at which point more cooling might be needed. That said, I would agree you probably never would be going to 100% fan but, I guess I would rather have something OP and pull it back than have something not up to snuff and never being able to achieve what I need.

Nice review!

enes sabanovic says:

The extra fan power is for bigger nozzles so it’s actually a good thing. With a 1.2mm nozzle you’ll have it closer to 100%

Chris Cherry says:

Great review Joel, thanks!

noahrocks11now says:

I’m thinking about getting a anet a8 and flash it should I buy it or no?

Dont Knowler says:

Sorry, did not quite get it: is the double-heigth variant just another variant of the reviewed kit printer, or is it a different model? If a different model, what are the technical differences, except for the Z-axis length? Thanks.

Taco Online says:

wish i could afford

J Z says:

Thanks for this Joel, I’m going to retrofit an X5SA kit for starters as it could benefit from most of the frame/rail mods, then a new self sourced build once the BOM maths have been done by me for a 400mm Z , saved me designing one from scratch as this incorporates all my ideas apart from a mech bed sensor, not seen the 3 Z motors before so that is a winner!

Write a comment

*

Human Verification: In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!

Send this to a friend

▷ Other ReviewsVehicles   Show Cars   Motorbikes   Scooters   Rims & Tires   Luxury BoatsFashion   Sunglasses   Luxury Watches   Luxury Purses   Jeans Wear   High Heels   Perfumes   Jewellery   Cosmetics   Shaving Helpers   Fashion HatsFooding   Chef Club   Fooding Helpers   Coktails & LiquorsSports   Sport Shoes   Fitness & Detox   Golf Gear   Racquets   Diving Equipment   Ski Gear   Snowboards   Surf Boards   Rollers & SkatesEntertainment   DIY Guides   Zik Instruments   Published Books   Music Albums   Cine Movies   Trading Helpers   Make Money   Fishing Equipment   Paintball Supplies   Trading Card Games   Telescopes   Knives   VapesHigh Tech   Flat Screens   Tech Devices   Camera Lenses   Printers   USB Devices   PC Hardware   Network Gear   Cloud Servers   Software Helpers   Programmer Helpers   Mobile Apps   Hearing AidsHome   Home Furniture   Home Appliances   Beddings   Floor Layings   Barbecues   Aquarium Gear   Safe Boxes   Office Supplies   Security Locks   Cleaning ProductsKids   Baby Strollers   Child Car Seats   Remote ControlledTravel   Luggages & Bags   Airlines Seats   Hotel Rooms   Fun Trips   Cruise Ships   Mexico Tours