JGAurora A5 3D Printer Review

Solid Printer, For a relatively low price

✌✌Gearbest Flash Sale: http://geni.us/JGA5GB $359 anniversary offer
✌✌Banggood: http://geni.us/JGA5SBG $429.99

MKS Wifi Module: http://geni.us/MKSWifi

Fillamentum: https://fillamentum.com/ use code 3DMAKERNOOB for 10% OFF
Prusa: http://geni.us/PrusaResearch
Polymaker: http://www.polymaker.com/
Fiberlogy: https://www.3dprintek.at/verkauf/

Models Printed:
Vorpal: https://www.thingiverse.com/thing:2513566
Folding Robot: https://fab365.net/
Steam Lady: https://pinshape.com/items/6288-3d-printed-steampunk-lady-lenora
GOT Dice Cup: https://www.myminifactory.com/object/3d-print-stark-dice-cup-1847
Make Test: https://www.thingiverse.com/thing:2755063
Twist Vase: https://www.myminifactory.com/object/3d-print-5-sided-twist-container-27986
Tyre: https://www.thingiverse.com/thing:859403
A5 Gopro Mount: https://www.thingiverse.com/thing:2733301


✌✌For the latest discounts codes on 3D Printers from gearbest, check out the following link (Constantly Updated): http://geni.us/3DMNOffers ✌✌

Matterhackers: http://geni.us/MH3DMN

Amazon International: http://geni.us/3DMNoob

Gearbest: http://geni.us/3DMNGB
Banggood: http://geni.us/3DMNBG
Aliexpress: http://geni.us/3DMNAE

Should you wish to support me, you can also do so via:
Patreon: https://www.patreon.com/3Dmakernoob
paypal: http://www.paypal.me/jcasha

Want to send me something? go ahead:

Attn: 3D Maker Noob Joe
P.O. Box 12
Constitution Street,
Mosta, MST 9059

Recording Equipment:
New Lens – Canon EF 10-18mm: http://geni.us/CanonEF1018

(A-Roll) Panasonic Lumix G7: http://geni.us/LumixG7 
(B-Roll) Canon EOS760D: http://geni.us/CanonEOS
Canon Lens: http://geni.us/Canon2470
ElGato Stream Deck: http://geni.us/Streamdeck
Elgato HD60S Capture Card: http://geni.us/elgatohd60
Timelapse – GoPro Hero 5: http://geni.us/GoProH5
Microphone, Rode Filmmaker Kit: http://geni.us/RodeFMkit
Light Boxes: http://geni.us/StudioLights
High Speed SD Card: http://geni.us/SandiskSD


CF zone says:

Great review, great printer.

Enoch Root says:

would this be a good printer for a beginner? The adjustments you suggest to counter the noise and file issues sound a little technical to a complete novice like me?

MiggyManMike says:

Not gonna lie, I did actually chuckled when you said jerry 😀

FAB365 3D Printing says:

Nice review! Next time I’ll think of a printer to buy. Thanks!

Utku Reis says:

Can you make a review for Anycubic Kossel Linear ?

Ejal Nvt says:

I don’t know if it’s my screen, the video or the printer. I see a lot of ghosting where there is text? Great video 🙂 how long did the flexible wheel take you to print at 16mm/s?

ColesAnimals says:

The prints look awesome, thanks for the review!

Bridge Valley says:

hello ,i see someone copy this video ….https://www.youtube.com/watch?v=BiIq9empKq0&ytbChannel=null

Daniel Lemire says:

Thanks for the great review.

I almost got myself a Tronxy X5S but your unbiased reviews of the X5S and of the JGAurora A5 has made me changed my mind. I’m used to printer kits (my current printer is an Anet A8) but for once it would be nice to get a printer that out of the box needs little to no hardware tweaking. But mostly a printer that does not make me change broken parts every months or two.

Made New Makerspace says:

Great review. Hey, FYI for anyone having underextrusion issues with this, I have the “little brother” to this one, the A3S, and I was having wicked underextrusion too. The problem, it seems is that JGAURORA isn’t calibrating their stepper drivers’ VREF very well, if at all. If you crack it open and tune the VRef up to about 0.6v, that more or less eliminated my underextrusion issue. A number of a5 & A3S owners have dealt with this same problem, so definitely worth noting.

skyjacker56 says:

twist vase is a little tight. looks nice though

Gunnar Freyr says:

good lookin printer

NewKidney says:

did u scaled up the foldable robot, i had in mind it is smaller in original ?

sharkovios says:

Great test of the A5 Joe. You might wanna consider flashing Marlin as other youtubers did it and say it’s more quiet and has better homing speed

SuendStoffMusic says:

thanks for the review an your work in general! a quick question: would you prefer this printer to a creality cr-10s? It seems like you’re getting very good results out of it with a comparible built-size. and (at least in the flash sales right now) for a better prize. Sorry for my bad english and happy easter-egg-printing (like I’m doing at the moment) from southern germany

Tac Blades says:

Great review seems like a really solid printer. Some reviews have had mixed success but this seems like the best experience so far.
There is some bad ringing but nothing that speed or acceleration couldn’t fix. The z axis is pretty amazing.
Its not a tinker machine I like to mod amd tinker. But if you just want to print then looks like a great choice 🙂

Semrich11 says:

As you suggested i bought the printer a few weeks ago, its really good, could you send me the start and end gcode? I have also the TMC2130 installed on the x and y Axis and its so quiet you can only hear the fan!

Anthony Cordero says:

Review the Monoprice mini delta 3d printer !!!!!!!

twistedkomlos says:

Hey Joe! Great review as always! Which would You recommend: Tevo Tornado or this A5? And why?

Ben's BatCave says:

I immediately hit the like button even before my browser loads your new videos.

7Westwood says:

thanks for another great review

Lysergesaure1 says:

Thanks for the review. Have you tried any ABS prints? How well does the heating bed work?

BrunenG says:

It would be awesome if we can see test prints with light from different directions. My current printer produce not the best prints but in right lighting they look awesome. On the resonance test I can see that light is sideways, which conceals a lot.
Nonetheless great vid as always.

Ron Floyd says:

Excellent review as always Joe. Those prints are great!

Uncle Jessy says:

Great review man!

Form Follows Function says:

I almost pulled the trigger on this printer as my first 3d printer but I ended up going with a Prusa MK3 instead. I’m sure the A5 is a great printer and I may pick one up at a later time for a 2nd printer.

brian whittle says:

Banggood have this printer at just slightly more money than gearbest if you order it from the USA warehouse, weird that it’s more from China.

UK Airsoft Videos says:

Would be great to see a review of the best ‘out of the box’ printers for the different price brackets

Team Grima Racing says:

That moment when you see that the printer you have is perfect. Great review also both my parents are fro Malta veleta

Geoff Kim says:

I really like the USB stick offline feature. Much more robust and convenient than using a microSD.

 Write a comment


Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!